1903 assessment of Douglas Fraser Sr.'s Ontario property
The Fraser farmhouse appears large enough to accommodate Douglas's and Kate's eight children.
|
Wednesday, May 23, 2012
Down east
While we tend to think of Douglas Fraser, Sr. as a teacher in Ontario, he did operate a 107-acre farm on the Maitland River, near Wingham, Ontario. An assessment dated 1903 noted a total of 102 acres cleared. Assets included 1 dog, 20 cattle, 3 horses, and 102 hogs.
Labels:
Douglas and Kate Fraser
Monday, May 21, 2012
Farewell Aunt Annie
The following portrait of Mom and Dad (Hazel and Murray Fraser) was taken at 400 St. Charles Street when Aunt Annie was in Winnipeg for a visit. A letter from her dated January 22, 1974 acknowledged receipt of the portrait:
This may well have been the last photo of Aunt Annie. She passed away just two months later, on March 30, 1974, at age 82.
The pictures came yesterday. Many thanks. Very good too, only that old lady you have out in front doesn't add any glamour.
Hazel and Murray Fraser with Aunt Annie |
Published in The Winnipeg Free Press, April 2, 1974 |
Labels:
Annie Belle Fraser
Greetings from Bournemouth
Annie Belle Fraser was an independent, curious and adventurous soul. She often travelled back to Ontario and kept up with the Fraser folks down there. But sometimes she ventured further afield. In 1969, at 77 years of age, she took a cruise to the British Isles aboard the new RMS Queen Elizabeth II.
The website http://listverse.com/2008/12/29/10-great-atlantic-ocean-liners claims this was a luxurious ship:
Aunt Annie travelled from Blenheim, Ontario through Detroit and sailed to Dublin out of New York. This trip of a lifetime cost $1879.84.
The cost was worth it. Aunt Annie enjoyed her trip very much, as evidenced by a letter to Murray and Hazel Fraser dated September 11, 1969:
The website http://listverse.com/2008/12/29/10-great-atlantic-ocean-liners claims this was a luxurious ship:
At the twilight of the golden age of Atlantic steamers came the QE2, launched upon the retirement of the first Mary and her sister ship. From the late 1960s until 2004, the QE2 was the only way to cross in luxury (aside from the Norway, before she became a cruise ship). She sailed more than just the Atlantic, though, and came to port in Sydney, Australia, among other places. This gorgeous superliner finally retired in 2008, to become a floating hotel in Dubai.
RMS Queen Elizabeth II |
The cost was worth it. Aunt Annie enjoyed her trip very much, as evidenced by a letter to Murray and Hazel Fraser dated September 11, 1969:
Labels:
Annie Belle Fraser
Souvenir of our school
With so many teachers in the family, Frasers were good students. Dad seems to have appreciated his own teachers, perhaps because he learned at home to respect the work they do. Among his keepsakes is a tiny booklet entitled, "Souvenir of our School" from 1925-1926. It lists a Pilot Mound School class of 26 students under teacher Nora E. Davidson.
Labels:
Murray Reid Fraser,
Pilot Mound
Friday, May 11, 2012
Teddy bears on parade
Among the items in Grandma's trunk was a small, tattered photo that didn't make it into the family album. It's out of focus, and light has leaked into the camera, but there's no mistaking those little ears. These days, he has a stiff hip and is feeling his age, but that's to be expected when you're over 90.
No, no, I don't mean Dad. I mean Teddy, Dad's bear.
Teddy sports black cotton palms and soles, which are actually patches that Grandma added to carefully mend his worn paws. His joints and head used to swivel, but have been sewn in place. One hip joint awaits surgery, and he's lost a little sawdust.
And speaking of bears needing surgery, Teddy has company in his hospital ward. L'il Teddy Bear, my own bear, has survived some very drastic procedures in his 60 years. My sister Virginia honed her surgical skills on this little body, including several skin grafts, and the implant of a red button heart.
As if this wasn't enough to "bear," L'il Teddy Bear once required an entire face transplant. Imagine my childhood terror to find my little bear in Montagnons' yard, with only the back of his head and ears hanging from his limp body. The neighbour's dog literally ripped his face off and kicked the stuffing out of him. I rushed L'il Teddy Bear to Emergency, and it was a miracle that he survived.
Yes, Mom skillfully crafted a new head, complete with embroidered nose, new button eyes, and a felt tongue.
No, no, I don't mean Dad. I mean Teddy, Dad's bear.
A young Murray Fraser with his bear, Teddy |
Spot looks dejected as Murray and Jessie hug their toys instead of him. |
Teddy sports black cotton palms and soles, which are actually patches that Grandma added to carefully mend his worn paws. His joints and head used to swivel, but have been sewn in place. One hip joint awaits surgery, and he's lost a little sawdust.
Much-loved Teddy |
As if this wasn't enough to "bear," L'il Teddy Bear once required an entire face transplant. Imagine my childhood terror to find my little bear in Montagnons' yard, with only the back of his head and ears hanging from his limp body. The neighbour's dog literally ripped his face off and kicked the stuffing out of him. I rushed L'il Teddy Bear to Emergency, and it was a miracle that he survived.
Yes, Mom skillfully crafted a new head, complete with embroidered nose, new button eyes, and a felt tongue.
Dr. Fraser's first patient. Just look at those fine sutures! |
Labels:
Murray Reid Fraser
Tuesday, May 1, 2012
A place for everything . . .
Even as little kids, we knew Dad's machinist's toolbox was special, and not just because it was kept in the kitchen instead of the garage or basement with his other tools. We admired its meticulous construction: those smooth-running drawers lined with green felt, complete with tiny wooden dividers keeping the tools safely in place, the micrometers in one drawer, taps and dies in another, and so on.
When downsizing in 2011, Dad was concerned that his toolbox find a good home. He had already donated his machinist's lathe to Red River College, and decided that a perfect home for his toolbox would be the Western Canada Aviation Musum. Their restoration teams would know the tools and could certainly make proper use of them.
The museum agreed. In fact, Shirley Render, their Executive Director, was delighted with the idea, and wrote about the donation in the Winter 2011 issue of their newsletter, Altitude, and included photos of Dad and his toolbox. Her text reads as follows:
When downsizing in 2011, Dad was concerned that his toolbox find a good home. He had already donated his machinist's lathe to Red River College, and decided that a perfect home for his toolbox would be the Western Canada Aviation Musum. Their restoration teams would know the tools and could certainly make proper use of them.
The museum agreed. In fact, Shirley Render, their Executive Director, was delighted with the idea, and wrote about the donation in the Winter 2011 issue of their newsletter, Altitude, and included photos of Dad and his toolbox. Her text reads as follows:
Another day brought an e-mail from Stephanie Fraser, daughter of Murray Fraser, a loyal member of the museum. Stephanie wrote on behalf of her father: "Dad has a long history in the aircraft industry, having started his training during WWII, followed by a successful 34-year career at Bristol Aerospace. At 92 years of age, he is now downsizing and would like his cherished machinist's toolbox to go to the museum."
Her note continues: "The toolbox was entirely hand-made by Dad in 1946, back on his father's farm. It is made of aircraft aluminum alloy and measures 30" wide by 16-1/2" high by 12" deep. The toolbox has 12 drawers of varying depths, each lined with green felt. The top hinges open for storage of large items, and a separate panel fits across the front to secure the drawers and accommodate a padlock.
"The training he received in the RCAF gave Dad the skills to build it, and it was a resume in itself. This toolbox helped him land a post-war job at Bristol Aerospace (MacDonald Bros.), when they weren't really hiring. But the firm was impressed with his work (including an aluminum tractor cab he built) and glowing references from his instructors, and they had the good sense to hire him!
"Dad would be so pleased if the museum would accept his toolbox as a donation. It certainly served Dad well, and I expect it would be welcomed by your crews. Included are several of Dad's prized machinist's tools that are still in immaculate condition."
The toolbox is handcrafted to carefully protect the tools and instruments inside. There was a time when machinists and craftsmen in most trades were expected to acquire their own tools and equipment. This gift from Murray Fraser epitomizes that era and, at the same time, is a unique example of a craftsman who took great pride in his equipment. Fraser's toolbox and its contents have found a good home at our museum.It was a win-win solution.
Dad poses with the afterburner of a J85-15 jet engine at the Western Canada Aviation Museum, his natural habitat. |
Labels:
Bristol Aerospace,
Hobbies / skills
Subscribe to:
Posts (Atom)